Vacuum-infused 3K 2x2 twill carbon-fiber construction
Carbon-fiber inner structure provides strength while reducing weight
Marine-grade gel coating with UV inhibitors
Polished for lasting protection and a high-gloss finish
Handcrafted construction
Weighs approximately 21.7 lbs.—about 9.3 lbs. lighter than the 31-lb. factory hood
Installs using factory hardware (not included)
Fitment
Fits 2015–2020 Shelby GT350 and GT350R models only.
IMPORTANT SAFETY AND INSTALLATION WARNING
Properly installed hood pins are required before operating the vehicle. Do not drive the vehicle with this composite hood secured only by the factory latch.
A suitable heat shield is required to protect the hood from engine-bay heat.
Do not reinstall the factory gas hood shocks, dampers, or struts. Their pressure may damage the composite hood. Lower and close the hood carefully by hand. Never slam or drop the hood.
Composite body panels must be test-fitted before final installation, painting, wrapping, or clear coating. Minor adjustments may be necessary. Installation should be performed by a qualified shop experienced with carbon-fiber or fiberglass body panels.
Confirm that the factory latch and hood pins engage securely before driving. Inspect the hood, hinges, latch, and hood pins regularly and before any track use.
Fitment Notes
Minor modifications are required to install the factory grille into the hood opening
Mounting tabs may require additional modifications or adjustments for proper fitment
